Last reviewed: March 28, 2026
2024 BMW 3 Series Oil Type & Fluid Specs
Oil Filter Part Numbers
Complete Fluid Specifications
BMW 3 Series Oil Specifications (2024)
The 2024 BMW 3 Series uses 0W-20 full synthetic oil meeting SP / BMW LL-17 FE+ specifications. European manufacturers are notably pickier about oil specifications than Japanese or American brands — in addition to the standard API certification, BMW requires oil that meets their own proprietary specification (SP / BMW LL-17 FE+). Not all 0W-20 oils meet this additional standard, so check the bottle for the BMW-specific certification before purchasing.
The 2.0L Turbo 4-Cylinder (B48) takes 5.3 quarts with a new filter. BMW uses a cartridge-style oil filter (11-42-8-583-898) rather than the spin-on type common on Japanese vehicles. Cartridge filters are slightly more involved to change — you'll need a cap-style filter wrench — but they're environmentally friendlier since only the filter element is replaced, not the entire housing.
Dealer vs DIY: The Cost Difference
BMW dealership oil changes typically run $120–$200, partly due to the higher cost of European-spec synthetic oil and partly due to dealer labor rates. A DIY oil change using the same quality oil and a quality aftermarket filter costs $45–$65. If you change your own oil twice a year, that's $110–$270 in annual savings. The process is no more complicated than on any other car — the engineering is in the engine, not the drain plug.
Save on Your Next Oil Change
Use our oil change cost calculator to see exactly what a DIY change costs compared to a shop — most 3 Series owners save $30–$60 per change. Not sure when to change it? Our oil change interval calculator gives you a personalized recommendation based on your actual driving habits, climate, and vehicle age.
Sources & Methodology
- 2024 BMW 3 Series Owner's Manual — Fluid specifications section
- American Petroleum Institute (API) — Oil certification standards
- FRAM, Mobil 1, Bosch — Oil filter cross-reference catalogs
Data last verified: March 28, 2026
2024 BMW 3 Series — Common Questions
The 2024 BMW 3 Series with the 2.0L Turbo 4-Cylinder (B48) engine takes 0W-20 Full Synthetic oil meeting API SP / BMW LL-17 FE+ specifications. You'll need 5.3 quarts with a new filter.
BMW recommends oil changes every 10,000 miles or 12 months for the 2024 3 Series, whichever comes first. If you frequently drive in severe conditions — lots of short trips, stop-and-go traffic, towing, extreme temperatures, or dusty roads — consider shortening that interval to 5,000 miles.
BMW specifies full synthetic oil for the 2024 3 Series. While using conventional oil in an emergency won't immediately damage your engine, it doesn't meet the same performance standards that your engine was designed around. Synthetic oil provides better protection at temperature extremes, lasts longer between changes, and reduces internal engine friction. For the relatively small price difference ($10–$15 more per oil change), stick with synthetic — your engine will thank you.
The OEM oil filter part number for the 2024 BMW 3 Series is 11-42-8-583-898. Compatible aftermarket filters include the FRAM CH12114, Mobil 1 M1C-455A, and Bosch 72273WS. Any of these will work well — the key is to always replace the filter with every oil change and to make sure the gasket on the old filter comes off cleanly when you remove it.